192.168.225.1 — JioFi Hotspot Admin Login

What is 192.168.225.1?

192.168.225.1 is a private IPv4 address used as the default admin gateway on JioFi pocket 4G hotspots from Reliance Jio — the portable MiFi units (JMR and M-series). The device acts as a small router, handing out 192.168.225.x addresses over its WiFi, with itself at 192.168.225.1. The same page answers to the hostname jiofi.local.html. It's an RFC 1918 private address, reachable only from a device connected to the JioFi.

Note: this is the portable JioFi hotspot address. JioFiber home broadband routers are different — those use 192.168.29.1.

Default username and password

This admin login is separate from the WiFi key printed on the device label or inside the battery cover — one connects you to the WiFi, the other signs you in to the settings page. Change the admin password after first login.

How to log in to 192.168.225.1 — step by step

1. Connect to the JioFi's WiFi. The network name and key are on the device label or inside the battery cover.
2. On a phone, turn off mobile data first. This is the most common reason the page won't load — see the warning below.
3. Open a browser and type http://192.168.225.1 (or http://jiofi.local.html) in the address bar, not the search box. Use http://, not https.
4. Sign in with administrator / administrator (or admin / admin).
5. Manage the device: change the WiFi name/password, check the data balance and battery, see connected devices, or read signal strength.

The mobile-data trap (read this first)

When you connect a phone to a JioFi, the phone notices the hotspot has "no internet" during setup and may silently switch back to mobile data — taking you off the JioFi network, so 192.168.225.1 can't be reached. The fix: turn off mobile data on your phone, reconnect to the JioFi WiFi, then open the page. On Android, also disable "automatically switch to mobile data" for that network. Re-enable mobile data when you're done.

How to change your JioFi WiFi name and password

After logging in, open Settings → Wi-Fi (Network) Settings, edit the SSID (network name) and the security key, then save. The JioFi restarts its WiFi and every device reconnects with the new password. You can also do this in the MyJio app. General steps for any device: how to change your WiFi password.

"192.168.225.1 not working" — fixes

• Phone fell back to mobile data: Disable mobile data, reconnect to the JioFi, retry (see above).
• Try the other address: If jiofi.local.html won't resolve, use the numeric 192.168.225.1, and vice versa.
• Use http, not https: The admin page is plain HTTP; an HTTPS redirect will fail.
• Turn off VPN: A VPN routes your request away from the local device — disable it while you log in.
• Login rejected: Try admin / admin if administrator fails, or reset the device.
• Forgot everything: Hold the reset button under the battery cover ~10–15 seconds to restore label defaults — this clears your settings.

What you can configure at 192.168.225.1

• WiFi name (SSID) and password, and the number of allowed devices
• Data usage / balance and battery status
• Connected device list and per-device blocking
• SIM PIN and network mode
• Admin password and device reset
• Signal strength and the 192.168.225.x LAN range

Getting the best speed from a JioFi

A JioFi's speed depends almost entirely on 4G signal, not the WiFi link. Place it near a window or high up, check the signal bars on the admin page, and keep it charged — battery-saver throttling can cut speed. Then run a speed test over the JioFi WiFi to see your real throughput, and compare it against mobile data vs WiFi speed expectations. Thinking of relying on it full-time? See phone hotspot as home internet.