HughesNet Speed Test in United States

Run a Speed Test

HughesNet delivers Satellite (GEO) in United States with typical measured speeds of 15–100 Mbps. Run a free speed test to see what your line is actually producing — and how it compares to your plan.

About HughesNet

HughesNet is a geostationary satellite ISP covering rural US. Latency is 600–800 ms — unsuitable for gaming or video calls. Download speeds of 15–100 Mbps are consistent but hard data caps apply. Best used when no other option exists.

Technologies HughesNet uses

  • Satellite (GEO)

HughesNet plans are asymmetric, meaning upload speed is significantly lower than download — factor this into plans if you work from home, stream, or back up to the cloud.

Typical HughesNet speeds

MetricExpectedWhat it means
Download range15–100 MbpsReal-world wired-test range across plan tiers
Plan floor15 MbpsEntry-level advertised plan
Plan ceiling100 MbpsTop-tier advertised plan
SymmetryAsymmetricUpload is a fraction of download — check the upload number on your plan page

How to get an honest HughesNet test result

  • Test on a wired Ethernet connection — Wi-Fi alone can hide 10–30% of your real line speed
  • Run one test mid-morning and one between 7–10 PM local time — the gap exposes peak-hour congestion on the HughesNet segment
  • Watch ping and jitter, not just download — they determine whether calls, games, and cloud apps feel responsive
  • Run 3–5 tests back-to-back and use the minimum — that is the speed your real-time apps experience, not the marketing peak
  • If your wired test is consistently 20%+ below the plan, it is worth a support call to HughesNet — provisioning drift is real and they will usually refresh your modem remotely

Frequently Asked Questions

What speeds does HughesNet deliver in United States?

HughesNet typically delivers 15–100 Mbps in United States across its Satellite (GEO) plans. Run a wired Ethernet speed test to see what your specific line is producing right now.

Why is my HughesNet speed test slower than my plan?

The three most common causes are Wi-Fi (can hide 10–30% of real line speed), peak-hour congestion between 7–10 PM on shared segments, and outdated router or modem hardware. Run one test on Ethernet mid-morning and a second at 9 PM to see the gap.

Is HughesNet good for gaming and video calls?

HughesNet plans have asymmetric upload, which can affect video calls and cloud uploads — check your upload number and ping, not just download. For competitive gaming, aim for ping under 30 ms and jitter under 5 ms on a wired connection.

How do I run an accurate HughesNet speed test?

Connect your device to the router via Ethernet cable, pause downloads and cloud sync, close streaming apps, and run 3–5 consecutive tests. Record the minimum result — that is the number that matches real-time usage, not the peak.

How we measure

The speed ranges and notes on this page combine publicly reported HughesNet plan information with wired Ethernet tests run through SpeedTestHQ across United States. Figures are directional, not a guarantee — your actual results depend on your specific plan, address, router, and time of day. See our accuracy methodology.

Run a Speed Test

Other United States ISPs

Xfinity

Run a Xfinity speed test and compare to your plan.

Spectrum

Run a Spectrum speed test and compare to your plan.

Verizon Fios

Run a Verizon Fios speed test and compare to your plan.

All ISPs

Browse every provider we track across every market.

Related Guides

Speed Test Accuracy Tips

How to get a speed-test result that actually matches what you are paying for.

Wi-Fi vs Ethernet Speed Test

How much speed Wi-Fi is hiding from your real connection — and how to prove it.

Why Is My Internet Slow?

The six most common reasons your real speed is nowhere near the plan.

How to Read Speed Test Results

What download, upload, ping, and jitter actually mean for day-to-day use.

More on Hughesnet

HughesNet Running Slow? How to Fix Satellite Internet Speed

HughesNet satellite internet has fundamentally different limitations than cable or fiber — high latency (600–800ms). Read on for the full walkthrough.