WindTre Speed Test in Italy

About WindTre

WindTre is Italy's third-largest ISP. Primarily FTTC with fiber-to-the-cabinet speeds up to 200 Mbps. Full FTTH is expanding in larger cities. Competitive bundled mobile+broadband deals.

Technologies WindTre uses

• Fiber (FTTC)
• DSL
• Fixed Wireless

WindTre plans are asymmetric, meaning upload speed is significantly lower than download — factor this into plans if you work from home, stream, or back up to the cloud.

Typical WindTre speeds

How to get an honest WindTre test result

• Test on a wired Ethernet connection — Wi-Fi alone can hide 10–30% of your real line speed
• Run one test mid-morning and one between 7–10 PM local time — the gap exposes peak-hour congestion on the WindTre segment
• Watch ping and jitter, not just download — they determine whether calls, games, and cloud apps feel responsive
• Run 3–5 tests back-to-back and use the minimum — that is the speed your real-time apps experience, not the marketing peak
• If your wired test is consistently 20%+ below the plan, it is worth a support call to WindTre — provisioning drift is real and they will usually refresh your modem remotely

Frequently Asked Questions

What speeds does WindTre deliver in Italy?

WindTre typically delivers 30–1000 Mbps in Italy across its Fiber (FTTC), DSL, Fixed Wireless plans. Run a wired Ethernet speed test to see what your specific line is producing right now.

Why is my WindTre speed test slower than my plan?

The three most common causes are Wi-Fi (can hide 10–30% of real line speed), peak-hour congestion between 7–10 PM on shared segments, and outdated router or modem hardware. Run one test on Ethernet mid-morning and a second at 9 PM to see the gap.

Is WindTre good for gaming and video calls?

WindTre plans have asymmetric upload, which can affect video calls and cloud uploads — check your upload number and ping, not just download. For competitive gaming, aim for ping under 30 ms and jitter under 5 ms on a wired connection.

How do I run an accurate WindTre speed test?

Connect your device to the router via Ethernet cable, pause downloads and cloud sync, close streaming apps, and run 3–5 consecutive tests. Record the minimum result — that is the number that matches real-time usage, not the peak.