Google Nest Wifi / Google Wifi Login Guide

Quick access

Step-by-step login

1. Connect to the router's network — you must be on Wi-Fi or Ethernet directly to this router, not a guest network or a VPN.
2. Open a browser and go to Google Home app. If that does not load, try the IP address directly: (not applicable).
3. Enter the credentials from the table above, or from the sticker on the unit if the default has been replaced with a per-unit password.
4. If login fails and you did not change anything, a factory reset is the only recovery — see the troubleshooting section below.

Security: the first thing to do after logging in

Default router passwords are in public databases. Leaving them unchanged is the most common way home networks get compromised. The first three things to change:

• Admin password — a unique strong password, ideally from a password manager
• Wi-Fi password — a separate strong password; never reuse the admin one
• Firmware update — check for and apply the latest firmware; most consumer routers ship with known-vulnerable firmware from the factory

For more, see our router firmware update guide and WPA3 vs WPA2 guide.

About this specific router

Google Nest Wifi has no traditional web admin page — all configuration is through the Google Home app on iOS or Android. This is a trade-off: easier setup for most users, but no direct access to advanced features like port forwarding granularity that power users want.

Troubleshooting: I can't get to the admin page

1. Wrong network. Confirm your device is connected to this specific router's Wi-Fi (not a neighbor's, not mobile data).
2. Wrong IP. The default may have been changed. On Windows, run ipconfig in Command Prompt and look for "Default Gateway". On macOS, System Settings → Network → Details → TCP/IP → Router.
3. VPN running. Local IPs do not route through a VPN tunnel — disconnect the VPN first.
4. HTTPS vs HTTP. Some routers only respond on http://, not https://. Try both.
5. Factory reset. Hold the reset button (usually a recessed button on the back) for 10–30 seconds. The router restarts and the original default credentials will apply again.

Official vendor support

For model-specific steps not covered above, go to the manufacturer's support site: https://support.google.com/googlenest/.

Frequently Asked Questions

What is the default admin IP for a Google router?

The default admin address is (not applicable). Type it into your browser while connected to the router's network. If that does not work, the IP may have been changed — on Windows, run 'ipconfig' and look for 'Default Gateway'; on macOS, check System Settings → Network → Details → TCP/IP.

What is the default password for a Google router?

(set in the Google Home app) Never leave a router on its default password — change it during initial setup. Default credentials are published publicly and attackers scan networks for unchanged defaults.

How do I reset my Google router password?

A factory reset is the only recovery if you've forgotten a custom admin password. Hold the reset button (usually a small recessed button on the back of the router) for 10–30 seconds until the lights restart. This erases all settings — Wi-Fi name, password, port-forward rules, and custom DNS — so be ready to re-configure.

Is it safe to keep my router's default password?

No. Default admin passwords for every major router brand are in public databases — attackers scan for routers with unchanged defaults and take over firmware, redirect DNS, or use the router in botnets. Changing the admin password is the single most important security step after buying a new router.